Pgt Aluminum French Doors

dog shadow box – To make a inventive wood body dog shadow box isn’t troublesome. The primary steps are you have to measure the image body with ribbon and use the pen to attract the identical measurement plywood. Sawing. Second, measure and lower two items of wooden to the specified depth of shadowbox for prime and backside of the field. Measure and lower to the identical width (throughout) as plywood once more.

Third, apply wooden glue within the higher and decrease edges of the plywood. Key items of wooden to plywood. Repeat for the edges, permitting the additional peak of the higher and decrease elements aggregates when measuring and chopping of the aspect items. Fourth, apply the stain to the field with the material. Wipe off extra. Let dry. Fifth, place the body within the dog shadow box.

Sixth, place the hinges to the body with screws and screwdriver. Repeat for the latch on the other aspect. Measure to seek out the middle of the again of the field and mark about 2 inches down from the highest edge. Place the hanger picture (if wanted). Final steps, set up the glass within the body, if desired. Your inventive wood body dog shadow box was executed.