Clean White Glass Backsplash Tiles

Chevron Curtains – First, measure the length of the curtains to determine the number of hook and loop fastening tape to buy. Second, lay the back of the drapery was directed down on a flat surface. Remove vocals from both sides of the belt fixing hook and loop and run it horizontally along the top edge of the first panel. Repetition of running a second piece of tape fastening along the top edge of the second panel.
Third, slip on a pair of rubber gloves and a respirator before mixing spoon 1/2 spoons (sodium phosphate) and 1/4 gallons of water lukewarm. Fourth, dampen a large kitchen sponge with a mixture of TSP and wipe cement walls above and on both sides of the window. Separate wet sponge with water and rinse off the solution Spoons. Allow the cement surface to dry completely before proceeding hanging chevron curtains.
Fifth, center other side of the hook and loop fastening tape about 1 to 2 inches above the window, or higher if the drapery panels are longer. Attach strips to the wall using adhesive cement. Sixth, automatically adhesive cement to dry for at least one to two hours before attaching the chevron curtains for wall mounting. They run hand drapery firmly attached on both sides of the Velcro hook-together.