White Window Valance Ideas

Tufted Chaise Lounge – First, unscrew and remove the seat of the chair. Turn the chair upside down, and locate the fixing screws of the seat structure. Loosen them, and pop off the seat. Second, with carefully peel the president of all upholstery. Keep intact for use as a pattern for new pieces of upholstery fabric. Third, remove the current button locks cutting the wire connection on the back of the cushion. Remove the support necessary to get access to the threads.
Fourth, measure the areas in your tufted chaise lounge you need to reupuholster. Get upholstery based on those measurements. Fifth, remove the old upholstery fabric covered buttons or use a kit to cover the new button on your desired fabric. Sixth, iron and old parts design flat upholstery. Pin to new upholstery fabric, right side up. Cut the new fabric into shapes. Seventh, re-sew seams together previously in the new tissue. Put the cushion and tufted upholstery new piece side. Leave one end open at any cushion covers.
Eigth, place the new fabric on the tufted foam. Nineth, guide from the top down. Pull firmly in the thread, and guided back to the top, as close to the original entry point. Sew with thread. Tying the knot and thread. Repeat this for each strand. Last, replace the chair cushions and upholstery hardware after it has been sewn, tacked or stapled in place. Tighten the screws in the seat cushions and back. And your new upholster tufted chaise lounge was done.