Glass French Door With Sidelights
Glass French Door With Sidelights – Installing French doors same procedure requires the installation of a standard door, with the added difficulty that is twice as large. The best way to install this door is to have one or two assistants provided holding the door frame in place during the installation process.
Installing glass French door with sidelights is a simple procedure, but if you have no experience-electric wiring, have a complete professional part of the task. Clear the entry of excess material. Place the door frame in the door, marking any section of the wall that interferes with the frame. Turn off power to the area of the circuit box. Run a power line wiring through the wall of the door and drill a hole for the duct in the door frame. Set the door frame near the door and connect the power lines of the power line coming from the door.
Extend waterproof caulking around the outer edge of the glass French door with sidelights frame. Slide the frame into place on the door with the help of assistants. Open the doors and have an assistant to hold the frame in place. Check the straightness of each four parts of the doorframe. Drill holes in the door through each of the predrilled holes in the frame, or drill their own holes through the frame and the door. Tighten all screws halfway. Check the frame of righteousness again with the level. Fully tighten the installation is complete.