How Can I Replace A Dripping Shower Faucet?

A shower faucet sometimes called an outlet tube. An investor controls whether the water out of the shower. Dripping shower faucet can be annoying and also cost money on water bills high. Dripping shower faucet can be related to the diverter fail or threads inside the faucet cracking and corrosion. Replacing your shower faucet prevent leakage, thereby saving money and preventing damage to the walls behind the key.

Shut off the main water supply to the house. Open the tap water to drain out of the line. Remove the dripping shower faucet, loosening a screw on the bottom with a hex wrench. Gently pull and turn the tap on his pipe. If you do not see a screw, the tap can be a type of thread. Turn the key counterclockwise to remove it.

Clean the pipe wall. If the threads of the pipe wall are corroded they are dirty, clean with a wire brush. Install new shower faucet. Slide the key into the pipe wall. Push against the wall and tighten the screw with a hex wrench. If the faucet is a screw type, apply Teflon tape to the threads and turn the key in the tube rotating clockwise until tight.