How To Install A Cartridge Shower Faucet Handles With Two Handles

The shower faucet handles with two handles identical cartridges used to control the flow of water through hot and cold tap. You must install a cartridge in the faucet when you are installing the faucet for the first time or when the key water is leaking. When replacing a cartridge, feel the temperature of the outlet water of the shower to find out which cartridge to replace. You need to install a new cartridge that exactly matches the old cartridge or continue leaking water faucet.

Directions install a cartridge shower faucet handles with two handles: 1) close the main valve of water in the house. Open another tap in the house to ensure that the flow of water is reduced completely. 2) Remove the anchor bolt handle shower using an Allen wrench or screwdriver Phillips. The screw is either under a plastic cover in the middle of the grip or in a small hole in its base. 3) Slide the faucet shank off the stem. Fixed an extractor handle in the handle if it is stuck and turn the toolbar from the center to the right to pull the lever off the shaft. 4) Rewind the retaining nut tap set, if available, with a key. Turn the adapter plastic parts out of the faucet. Extract clips or metal pins using a pair of needle nose pliers.

We invite you to look at our example 12 shower faucet handles in the photo gallery.