Minnie Mouse Wall Decals Giant

Folding Chaise Lounge – First, remove the nails that hold the sail back to the bars at the top of the chair and the back of the chair frame. Second, add sailed flat and measure its length and width. Third, cut a piece of canvas or other outdoor fabric 1 inch wider and longer than the old sling.
Fourth steps to replace a sling back on folding chaise lounge, make 1/2-inch folds and pin on both side edges of the sling. Sewing a straight stitch with a standard stitch length and sewing hems in place by stitching 3/8 inch away from the folds. Fifth, set the machine to sew a zig-zag stitch. Iron a 1/2-inch fold on both top and bottom sides. Sixth, thread an upholstery needle with 16 inches of the padding thread and knot the ends together. at the top of the back of the chair, wrap the top folded edge around the bar. Hand sew the sail to the chair, sewing 1/8 inch from the folded edge.
After finished, repeat the steps of same.The seams in the second nail will fill the spaces between the stitches in the first nail. This makes the seam strong enough to bear a person’s weight. The binder thread near the end of the seam and cut off the excess. Last, insert the lower end of the sling in the same way as you attached to the top. Your replace a sling back on folding chaise lounge was done.