Best Indoor Outdoor Rugs Design

How To Install Outswing French Doors – Outswing french doors bring the outside in and make the most of your living space. State of the per-hung double doors opening unity centered in the wall opening in the hole. Hammer a nail in the frame behind with a sixteen penny nail. Next, Wedge shims behind the top of the pillar on one side. Then, place a level against the edge of the style on the same side.
Tap on the jamb of outswing french doors or on the ground until the bubble is centered in the level. Repeat leveling and nailing process with the remaining jamb. Wedge wedges between the header jamb and the wall framing header on both corners. Hammer nails up by securing the header jamb. Push treated deck screw. Nail the side stone mold to the frame at the top and bottom of each side. Choose which door you pass door will be when both doors are not open.
Place the rotary striker mechanism through the lower hole in the edge of the passage outswing french doors. Insert and secure the deadbolt mechanism in the upper hole. Place the two halves of the doorknob by the striker mechanism according to the instructions that came with the button. Thread the two long screws through the base plate on the inside of the button, and tighten with a screwdriver. Do the same with the deadbolt barrel in the top hole; certainly the twist lock goes to the inside of the door. Install door casing on the inside face of the door jamb frame.